Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0258-02 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of small components with simple geometries not requiring special approval procedures for their application in demanding sectors such as hydraulic systems, food, paper and chemical industry Opinions adopted
0258-01 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry Opinions adopted
0257-01 Initial Chromium trioxide 215-607-8 1333-82-0 QUALIPAC Aurillac; Etablissements R.GRAINDORGE Industrial use of chromium trioxide for the etching of polypropylene (PP) substrates, as a pre-treatment step of the electroplating process, for the luxury sector and other applications Opinions adopted
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Opinions adopted
0255-03 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide in the hard chromium coating of complex outer and inner surfaces of firearms auxiliary parts requiring a customised and selective coating technique and subject to thermal, mechanical and chemical stresses, in order to provide wear resistance and barrier properties, as well as post-processing capability and resistance to hot combustion gas erosion. Opinions adopted
0255-02 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide in the hard chromium coating of complex outer surfaces of firearm auxiliary parts subject to mechanical, chemical and thermal stress in order to provide optimized sliding properties as well as heat, corrosion and wear resistance properties. Opinions adopted
0255-01 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. Opinions adopted
0254-02 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance Opinions adopted
0254-01 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for functional chrome plating of aircraft safety critical steel ball screws used in airplane's actuators, to decrease friction ratio, and enhance wear, corrosion, and endurance resistance, enabling targeted service life Opinions adopted
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Opinions adopted