Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0255-02 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide in the hard chromium coating of complex outer surfaces of firearm auxiliary parts subject to mechanical, chemical and thermal stress in order to provide optimized sliding properties as well as heat, corrosion and wear resistance properties. Opinions adopted
0255-01 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. Opinions adopted
0254-02 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance Opinions adopted
0254-01 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for functional chrome plating of aircraft safety critical steel ball screws used in airplane's actuators, to decrease friction ratio, and enhance wear, corrosion, and endurance resistance, enabling targeted service life Opinions adopted
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Opinions adopted
0252-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Eastern Europe Sp. z o.o. The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Eastern Europe Sp. z o.o. in the functional chrome plating of shock absorber rods. Opinions adopted
0251-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Europe BVBA The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Europe BVBA in the functional chrome plating of shock absorber rods. Opinions adopted
0250-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Ibérica The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Ibérica S.A in the functional chrome plating of shock absorber rods. Opinions adopted
0249-01 Initial Chromium trioxide 215-607-8 1333-82-0 Monroe Czechia s.r.o. The use of Chromium Trioxide (EC 215-607-8) by Monroe Czechia s.r.o. in the functional chrome plating of shock absorber rods. Opinions adopted
0248-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - FYSOL SAS [name of applicant in the original application: OCV Chambéry France S.A.S. updated due to a notified legal entity change] Mixing by the Applicant of a NPnEO-containing epoxy resin, resulting in mixtures containing < 0.1% w/w of NPnEO for the manufacture of glass fiber articles for critical composite helicopter parts, that is exempt from authorisation under REACH Art. 56(6)(a) Opinions adopted



EU Privacy Disclaimer

This website uses cookies to ensure you get the best experience on our websites.