Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided Details
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc – [Decision discontinued as of 01/01/2021] The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Discontinued as of 01 January 2021 Details
0227-01 Review report Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use as a processing aid in the biotransformation of starch to obtain betacyclodextrin Commission decided Details
0018-01 Initial Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use of trichloroethylene as a processing aid in the biotransformation of starch to obtain betacyclodextrin Commission decided Details
0166-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rousselot bvba Use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated as a surfactant in the manufacturing of low endotoxin gelatin Commission decided Details
0007-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Roxel (UK Rocket Motors) Ltd Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired Details
0007-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired Details
0007-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles Authorisation expired Details
0195-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - RSI ChemRep Europe Ltd (O002) OR for OraSure Technologies Inc Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as surfactant in in –vitro diagnostic device developer solution. Commission decided Details
0268-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetteria Paffoni S.p.A. Functional chrome plating with decorative character of metal substrates for sanitary applications Opinions adopted Details
0269-01 Initial Chromium trioxide 215-607-8 1333-82-0 RUBINETTERIE 3M SRL Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Opinions adopted Details
0277-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetterie Ritmonio Srl Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted Details
0303-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetterie Stella S.p.A Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0115-03 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of alkali metal dispensers containing potassium chromate for production of photocathodes. Commission decided Details
0115-01 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of potassium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided Details
0115-02 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided Details
0115-04 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of alkali metal dispensers containing sodium chromate for production of photocathodes. Commission decided Details
0024-01 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Use Of Trichloroethylene in Industrial Parts Cleaning by Vapour Degreasing in Closed Systems where specific requirements (system of use-parameters) exist Authorisation expired Details
0024-04 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Use of tricholoroethylene in formulation Commission decided Details
0208-01 Review report Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Industrial use of trichloroethylene as process chemical (enclosed systems) in Alcantara Material production Commission decided Details
0024-02 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Industrial use as process chemical (enclosed systems) in Alcantara Material production Commission decided Details
0024-05 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Use of Trichloroethylene as Extraction Solvent for Bitumen in Asphalt Analysis Commission decided Details
0024-03 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Use of tricholoroethylene in packaging Commission decided Details
0347-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of slurry mixtures containing chromium trioxide for the surface treatment of aircraft engines parts including turbines and compressors Opinion development Details
0209-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness Commission decided Details
0065-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness Commission decided Details
0230-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Safran Landing Systems; SOCIETE DE TRAITEMENTS ELECTROLYTIQUES NORMALISES S.T.E.N. Industrial use of 4-NPnEO as non-reactive surfactant in the sealing product in sulfuric acid anodization process of aluminium alloy parts of aircraft landing gears Withdrawn Details
0346-02 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Landing Systems; TSM; REVETEMENT DE CHROME DUR; SOCIETE TECHNIQUE D'ETUDES ET DE GESTION; SABENA TECHNICS BOD; OMA S.P.A.; Metal Sud s.r.l; Safran Landing Systems Services; Compañia Española de Sistemas Aeronauticos, (C.E.S.A.), S.A.U.; Aerostar S.A. Industrial use of chromium trioxide for hard chrome plating in the manufacturing and the repairing of landing gear parts exclusively supplied by Safran Landing Systems and for which there is not yet potential alternatives identified as part of the substitution process. Opinion development Details
0346-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Landing Systems; TSM; REVETEMENT DE CHROME DUR; SOCIETE TECHNIQUE D'ETUDES ET DE GESTION; SABENA TECHNICS BOD; OMA S.P.A.; Metal Sud s.r.l; Safran Landing Systems Services; Compañia Española de Sistemas Aeronauticos, (C.E.S.A.), S.A.U.; Aerostar S.A. Industrial use of chromium trioxide for hard chrome plating to provide key functional properties such as wear resistance (...) in the manufacturing of landing and braking system parts for aeronautical applications exclusively supplied by Safran Landing Systems without technical limitations with the identified alternative. Opinion development Details
0214-02 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Pretex® functional chrome plating using chromium trioxide in closed reactor systems for the establishment of adjustable hemispherical surface structures on working rolls applied in the steel industry for the manufacture of cold-rolled, high quality textured sheet metal Commission decided Details
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Commission decided Details
0156-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanofi Pasteur Use of Octoxynol-9 for virus splitting and inactivation step in the manufacturing of influenza vaccines Commission decided Details
0199-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanquin Reagents B.V. Use of Triton™ X-100 (4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated) in formulation of components for IVD kits. Commission decided Details
0260-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sarrel Sarreliber - Transformação de Plásticos e Metais, S.A Industrial use of chromium trioxide for the etching of plastics materials, as a pre-treatment step of the electroplating process, for automotive applications mostly Opinions adopted Details
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided Details
0276-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sc OsmaPlast Romania SRL Industrial use of hexavalent chromium for a pre-treatment step (etching) in the electroplating process for various applications. Opinion development Details
0276-02 Initial Chromium trioxide 215-607-8 1333-82-0 Sc OsmaPlast Romania SRL Industrial use of hexavalent chromium to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for various applications Opinion development Details
0131-01 Initial Chromium trioxide 215-607-8 1333-82-0 Schell GmbH & Co. KG Armaturentechnologie Functional chrome plating with decorative character for sanitary applications Commission decided Details
0141-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties resulting in cellular lysis and protein interactions rupture and required for the production of reagents involved in the determination of proteins of interest in gel and capillary electrophoresis IVD tests. Commission decided Details
0141-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. Commission decided Details
0141-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. Commission decided Details
0142-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - SEBIA Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. Commission decided Details
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Commission decided Details
0353-01 Initial Tetraethyllead 201-075-4 78-00-2 Shell Nederland Raffinaderij B.V. Use of tetraethyl lead in the formulation of aviation fuel Opinion development Details
0275-01 Initial Chromium trioxide 215-607-8 1333-82-0 SICROM S.r.l. Functional chrome plating of hydraulic cylinders and swivel joints using chromium trioxide Opinions adopted Details
0154-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD-kit reagents Commission decided Details
0154-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD- wash solutions Commission decided Details
0154-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in isolation of protein from recombinant cell cultures for the production of IVD-kits (protein cell extraction) Commission decided Details
0154-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-kit reagents on diagnostic analyser systems Commission decided Details
0154-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-wash solutions on diagnostic analyser systems Commission decided Details