Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid.

ID	Application type	Name	EC Number	CAS Number	Applicant(s)	Use name	Status
0169-01	Initial	4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated	-	-	Janssen Vaccines & Prevention BV Janssen Biologics B.V.	4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step.	Commission decided
0046-02	Initial	Strontium chromate	232-142-6	7789-06-2	AKZO Nobel Car Refinishes B.V. Habich GmbH Henkel Global SupplyChain B.V. Indestructible Paint Ltd. Finalin GmbH Mapaero PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Industries (UK) Ltd PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]	Application of paints, primers and specialty coatings containing Strontium Chromate in the construction of aerospace and aeronautical parts, including aeroplanes / helicopters, spacecraft, satellites, launchers, engines, and for the maintenance of such constructions.	Commission decided
0256-01	Initial	Chromium trioxide	215-607-8	1333-82-0	KaVo Dental GmbH	Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment	Opinions adopted
0289-02	Initial	Chromium trioxide	215-607-8	1333-82-0	Fabbrica d'armi Pietro Beretta SPA	Chromium trioxide based functional chrome plating of gun barrel bores and auxiliary parts for semi-automatic shotguns, over/under, side-by-side shotguns, pistols and carbines for civilian uses.	Opinion development
0289-01	Initial	Chromium trioxide	215-607-8	1333-82-0	Fabbrica d'armi Pietro Beretta SPA	Chromium trioxide based functional plating of gun barrel bores and auxiliary parts for assault rifles, carbines and pistols for non-civilian uses.	Opinion development
0220-01	Initial	Chromium trioxide	215-607-8	1333-82-0	SRG Global Ibi, S.L.	Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications.	Opinions adopted
0286-02	Initial	Chromium trioxide	215-607-8	1333-82-0	Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH	Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring high wear resistant surfaces to withstand abrasive forces occurring in their application	Opinion development
0286-01	Initial	Chromium trioxide	215-607-8	1333-82-0	Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH	Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring optimal tribological surface properties (resulting from microcracked surface) to ensure low surface friction under lubrication	Opinion development
0286-04	Initial	Chromium trioxide	215-607-8	1333-82-0	Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH	Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring high wear resistant surfaces to withstand abrasive forces occurring in their application	Opinion development
0286-03	Initial	Chromium trioxide	215-607-8	1333-82-0	Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH	Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring optimal tribological surface properties ( resulting from microcracked surface) to ensure low surface friction under lubrication	Opinion development

Showing 1 - 10 of 472 results.

Export in:

EU Privacy Disclaimer